Scale with MIMIC Simulator and get 30,000 additional devices

Gambit Communications has a special for this month.

Buy a MIMIC SNMP Simulator 20,000 agent license and you will get
a *FREE upgrade to 50,000 agent* license instead.

You will get a scalable lab the way you always wanted, filled with
thousands of devices without spending your entire capital budget.
You will be able to test the scalability of your management applications
with 30,000 more devices.

Please use the promo code: *August11 *
This promotion is valid until August 31st, 2011.

Best Regards,

Tested MIMIC 11.20 on VectorLinux 7.0 RC1

FYI, we ran MIMIC SNMP Simulator 11.20 with no problems on VectorLinux 7.0RC1.
Below is a screenshot of an agent with a SNMP simulation being accessed.

MIMIC SNMP Simulator 11.20 runs on Fedora 15 LXDE spin

FYI, MIMIC SNMP Simulator 11.20 runs out of the box on the recently released Fedora 15 LXDE spin.
Previous reports have demonstrated MIMIC operating on a variety of Linuxes.
This demonstrates that MIMIC can run well on the most recent Linux distributions.
The screenshot below shows a SNMP simulation being queried remotely.

Gambit Facebook followers weekly drawing for 1-week CCNA pod ($20 value)

Like the "Gambit Communications" Facebook page

http://www.facebook.com/pages/Nashua-NH/Gambit-Communications-Inc/105269342840455

and be automatically entered in a weekly drawing for a 1-week CCNA
practice pod ($20 value). This promotion runs until September 1, 2011.
We'll announce the weekly winner on our wall.

Get ready for your CCNA: A new contest with $70 grand prize

We are announcing a new contest, free to all.

All correct answers will be entered in a drawing for a grand prize valued
at $70 ($50 cash transfer + 1 week rental CCNA pod), and four other prizes
for free rental of our Cisco CCNA lab. No need to fill out any forms.

To enter, connect to your free demo pod at

http://www.gambitcommunications.com/contest/

and win the contest by answering this question:

- enable IPv6 connectivity between router1 and router2 over the serial
interface connecting them, so that you can ping each other's IPv6
address.

Use IPv6 subnet 2001:A10:1:10::/64 for this exercise. What are the IOS
commands necessary to accomplish this? Obviously, your last command
would be a successful ping command.

-------------------------------

Rules:

The contest is open until Tuesday July 20, 2011 at 12pm EDT.
Email your answer to us at contest-20110706@gambitcomm.com .
At that time we will conduct a random drawing of the correct entries.

The grand prize is USD $50 cash transfer via Paypal or USD $50 gift card
to Amazon (your choice) plus one free week of MIMIC Virtual Lab Cloud ($20
value), and 4 second prize winners will win a free week of MIMIC Virtual
Lab Cloud (USD $20 value) to practice their skills. We will announce
the winners on this forum. Previous winners of our contests are excluded.

To see winners of our previous contests, just search for "contest" in this
forum.

Regards, and good luck!

Changing statistics values in MIMIC SNMP Simulator

FYI, we have published a new instructional video

"Changing statistics values in MIMIC SNMP Simulator"

which shows how to easily change specific statistics counters and
visualize them in a management application.

The video is at

http://www.youtube.com/watch?v=z0HU8P0MVz8


Follow us on Facebook to be the first to hear about our latest news and promotions.

Study for the Cisco CCNA certification and win cash

We are announcing a new contest, free to all.

All correct answers will be entered in a drawing for a grand prize valued
at $70 ($50 cash transfer + 1 week rental CCNA pod), and four other prizes
for free rental of our Cisco CCNA lab. No need to fill out any forms.

To enter connect to your free demo pod at


http://www.gambitcommunications.com/contest/

and win the contest by answering this question:

1) log onto the console of "Switch 2" and reset the running config using
these commands:

erase nvram:
reload

2) once the device reboots, implement the configuration to connect it
to both uplink switches and "Router 2".

NOTE: Saving the running config before the reload and restoring it
afterwards is NOT what we are looking for!

3) verify connectivity with 3 ping commands.

What are the commands necessary for steps 2 and 3?


Hint: you only need to execute commands on switch2.

-------------------------------

Rules:

The contest is open until Tuesday June 7, 2011 at 12pm EDT.
Email your answer to us at contest-20110524@gambitcomm.com .
At that time we will conduct a random drawing of the correct entries.

The grand prize is USD $50 cash transfer via Paypal or USD $50 gift card
to Amazon (your choice) plus one free week of MIMIC Virtual Lab Cloud ($20
value), and 4 second prize winners will win a free week of MIMIC Virtual
Lab Cloud (USD $20 value) to practice their skills. We will announce
the winners on this forum. Previous winners of our contests are excluded.

To see winners of our previous contests, just search for "contest" in this
forum.

Regards, and good luck!

Gambit Communications
Developers of MIMIC Virtual Lab Cloud and MIMIC SNMP Simulator