SiteWhere tracks simulated sensors

We have used the SiteWhere JSON API to register a multitude of
simulated Bosch sensors driven by MIMIC MQTT Simulator
and are generating telemetry.

With MIMIC you can setup large IoT environments very quickly to
test/deploy/tune/train your IoT platform.

10 simulated sensors driving charts and rules in Samsung Artik

This 1-minute video shows 10 simulated sensors in MIMIC MQTT Simulator
from Gambit Communications as displayed by the Samsung Artik IoT
platform. The sensors are changing temperature in real-time, which is
reflected in the charts. When the temperature goes above a threshold on
any sensor, e-mails are sent.

With MIMIC you can reproduce any scenario at will for testing, training
or demo of your IoT application.

Real-time simulated control system on Samsung Artik

In this one-minute Youtube video you'll see a real-time simulation in
MIMIC MQTT Simulator of a control system with multiple sensors exporting
temperature values to the Samsung Artik IoT platform. The values increase
until a threshold, at which time the platform rule activates an actuator,
causing the temperature values drop. When low enough, the actuator is
turned off.

This setup quickly simulates what happens in any kind of control system,
be it a data center with heating computers and fans to cool them, dams with
rising water levels and valves to release the water, pressure inside reactors,
etc.

What is missing in this simulation are backup rules in case the temperature
does not respond as expected. Once implemented, the simulation can
verify any pathological scenario, allowing disaster training, etc.

MIMIC MQTT Simulator can prototype solutions in a fraction of the time of
real systems.

Real-time telemetry from simulated sensors to Thingsboard

MIMIC MQTT Simulator can deterministically control multiple sensors'
telemetry values to reproduce any scenario you need.

In this one minute Youtube video we demonstrate how it can be done.
We change the temperature values of 5 simulated sensors that are displayed
in the customized Thingsboard dashboard.

In MIMIC, what you can do with one simulated sensor you can do with
thousands, if not millions.

Video: Simulated real-time telemetry to Thingsboard IoT Platform

This 30-second Youtube video demonstrates real-time changing telemetry
from a simulated sensor in MIMIC MQTT Simulator visualized in the
Thingsboard dashboard. In MIMIC, what you can do to one sensor you can
do to thousands, if not millions, to allow development, testing, tuning,
training, demonstration of complicated IoT scenarios at large scale.

Video: Real-time telemetry simulation to Pubnub

Pubnub has recently updated their MQTT support and we have verified
that indeed it is easy to connect simulated MQTT sensors.

Following those directions we have configured our usual Bosch sensor
simulation in MIMIC MQTT Simulator to publish changing temperature
values and which are detected in a configured function in Pubnub
as shown in the debug console.


This 1-minute Youtube video shows the sensor publishing diverse
telemetry such as acceleration, humidity, temperature, pressure, etc
every 10 seconds. After a couple of intervals we change the temperature
in real-time through the MIMICview GUI from 50 C to 150 C. The configured
function in Pubnub detects the published values and prints them in the
debug console.

What we did interactively through the GUI can be done programmatically
for any number of sensors at will to reproduce any required scenario.

Real-time telemetry simulation to Samsung Artik IoT platform

In this video we demonstrate in 1 minute how MIMIC MQTT Simulator
exports real-time telemetry that changes precisely. The chart in the

Samsung Artik dashboard that monitors the temperature value shows
the changes at the instant they happen.